Replaces the repeated-tap timeout cycling (0-10, one tap per minute)
with a dedicated screen and slider (1-15 minutes, then "Never"). The
screensaver toggle moves from its own System-menu row into this
screen, directly below the slider, since it only determines what
happens when the timeout fires.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
OTA downloads always failed because GitHub's browser_download_url
returns a 301/302 redirect to a signed objects.githubusercontent.com
URL, which HTTPUpdate doesn't follow by default. Now sets
HTTPC_STRICT_FOLLOW_REDIRECTS before downloading.
Update results (success and failure) are now shown as a persistent
info screen requiring an explicit tap to dismiss, instead of a
1.2-1.5s auto-vanishing message followed by an automatic restart -
a firmware update result is important enough that it shouldn't be
missable. Also fixes long dynamic titles (e.g. "Update available:
v3.5.0") and the installing-progress label overflowing the screen
edge in some languages.
Release workflow no longer renames the build artifact to
CYD-flightradar.bin before upload; the release asset is just
firmware.bin now, matching what OtaUpdate::checkForUpdate() looks
for. CLAUDE.md's release workflow updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New "Screensaver" toggle in Menu > System (off by default). When the
inactivity timeout fires with it enabled, the display shows a dimmed
starfield with a large centered clock instead of turning the
backlight fully off; a tap wakes it and redraws normally. Off keeps
the existing behavior unchanged.
Also fixes OtaUpdate::checkForUpdate() to look for the release asset
"CYD-flightradar.bin" (the actual filename used by the release
workflow) instead of the placeholder "firmware.bin" it was checking
for before.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New "Check for update" entry in Menu > System checks the latest
GitHub release's tag against the running version and, if newer,
downloads and flashes its firmware.bin asset directly over WiFi -
no cable or web flasher needed. Requires switching the partition
scheme to min_spiffs (two OTA-capable app partitions instead of a
single non-OTA one), which needs a full reflash.
confirmWarningScreen() now takes title/body as strings instead of
StringIds so it can show a dynamically composed message (the target
version number) for the update confirmation, with an accent color
parameter so the OTA confirmation can use green instead of the
red used for the existing destructive-action confirmations.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Detail panel now shows origin/destination via adsbdb.com callsign
lookup. Rotorcraft (ADS-B category A7) get a distinct rotor-cross
marker instead of a heading arrowhead, same rationale as the existing
ground-vehicle marker. WebUI info screen gets a QR button (when WiFi
is connected) that renders the local WebUI URL as a scannable code.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bundles several small local follow-ups since v3.3.0:
- Radar screen aircraft detail panel: long lines (model name, distance
with km/nm/mi) now scroll horizontally instead of being cut off with
"..." (up to 9 independent scrolling lines, reusing the existing
InfoMarquee pattern).
- "Setup complete" screen: small centered "Tap to skip" hint below the
countdown button, translated into all 6 languages.
- Location Presets screen: long preset names/coordinates in the list
now scroll left-aligned instead of being truncated with "...".
- Address search confirmation screen: the found place name is no
longer hard-cut at 150 characters - it's now a vertically scrollable
paragraph (same pattern as the existing Location Presets info
screen), since it's multi-line wrapped text rather than a single
overflowing line.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Moves the previously standalone "Backup settings"/"Restore settings"
buttons out of the System menu into a new "Backup & Reset" sub-page
(replaced in the System menu by a single folder button, placed
directly above "Info"), and adds a third entry "Reset settings" - a
factory reset for developers/testers that deletes the entire
Flightradar folder from the SD card (settings, logbook, location
presets, WiFi, calibration - everything) and restarts the device. The
next boot picks up isFirstRun automatically (via the missing
SD_SETTINGS_FILE) and runs the full first-time setup again, exactly
like on the very first boot - no need to pull the SD card.
Since this is irreversible, it requires a full-screen red warning
confirmation first, reusing the same overlay previously built only for
the flight-logbook enable warning (confirmLogbookEnable() generalized
to confirmWarningScreen(), taking title/body StringIds as parameters).
New SdStorage::deleteDirectoryRecursive() and
SettingsBackup::factoryReset() implement the actual deletion + restart.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Ground vehicles (ADS-B emitter category "C*") now render as filled
blue squares instead of the normal circle+arrowhead aircraft marker,
using a fixed color independent of altitude (they're practically
always at 0ft, which would otherwise collide with the low-altitude
green). A second legend line explains the marker, but only when
ground vehicles are actually visible (Flight Options > "Hide ground
vehicles" off) - the info bar height, and therefore the radar circle
size, is otherwise unchanged from before.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The preset-name keypad (used both when adding a preset via manual
coordinates and after an address search) only showed "Name
(optional):" with no indication of what kind of name was expected.
Adds a localized hint line with example names (e.g. "Home, Work,
Holiday home") under the title in both runPresetNameKeypad()
(location_presets_screen.cpp) and runNameKeypad()
(address_search_screen.cpp), measuring the header height dynamically
via getCursorY() the same way runAddressKeyboard() already does, so
the input field and keyboard shift down to make room regardless of
translation length.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The address search screen previously gave no hint about the expected
input format and had no punctuation keys at all on either keyboard
page, making addresses like a house number "45/3" impossible to type.
Adds a localized format-hint line under the title, comma/hyphen keys
on the main keyboard, and swaps four rarely-needed accented letters on
the special-character page for "/", ".", "'", "-". The header and
input field position are now measured dynamically (getCursorY())
instead of assuming a fixed pixel offset, so longer translations of
the hint text don't overlap the keyboard.
Adds a new FirstRunCompleteScreen shown after the location setup step
on first boot: confirms setup is done, names the SD card folder all
data is stored in, and notes that WiFi will reconnect automatically
from now on, with a large "Flightradar" button leading into the app.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Shortens the first-run location screen's body text in all 6 languages
and makes its buttons follow the text's actual height instead of a
fixed screen position - the longer German translation previously ran
underneath the "Enter Address"/"Skip" buttons, making it unreadable.
Adds a new info paragraph to the Location Presets "?" screen (all 6
languages) pointing to the native "Search by address" option added in
the previous commit, plus the same tip to the README's Getting Started
section.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a new AddressSearchScreen: enter an address on a dedicated
keyboard (with a special-character page for common European accented
letters), geocode it via the free OpenStreetMap Nominatim service,
confirm the found place, optionally name it, and save it as a new
location preset - no external website needed anymore.
Reachable both from Location Presets > "+" (choice between "by
address" and manual coordinates) and, for new users, from a one-time
FirstRunLocationScreen shown right after the language picker on first
boot, explaining why an exact address beats automatic IP geolocation
and letting them set it up immediately (skippable).
Removes the itilog.com link/tip added in the previous commit (Location
Presets info screen, all 6 languages, and the README) - superseded by
this native in-app flow.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a new info paragraph to the Location Presets "?" screen (all 6
languages) recommending itilog.com for getting exact address
coordinates, since automatic IP-based geolocation can easily be off by
20-30 km - enough to hear a plane while the radar stays empty. Adds
the same tip to the README's Getting Started section, with a
clickable link.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tapping the weather icon in the header now shows a small info popup
explaining that the shown weather always follows the currently active
location (including an active location preset).
The System menu's buttons now fill the available screen height
instead of leaving unused space below, computed from a dedicated
systemRowRect() helper. "Info" (About) is pinned as the second-to-last
entry, directly above Back, so its position stays stable regardless of
how many other entries come before it.
In the Flight options menu, all plain ON/OFF toggles (LED heartbeat,
emergency alert, proximity LED, watchlist alert, hide ground vehicles)
are now grouped together at the end of the list, right above Back,
instead of being interleaved with the screen/list entries above them.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a "Logbook / WebUI" entry directly in Menu > System, showing the
device's IP and usage instructions (previously only reachable via a
hidden "?" button in Logbook Files). The web export page now supports
downloading and deleting individual daily logbook CSV files, in
addition to the existing merged CSV download.
Fixes a task watchdog reset that could reboot the device mid-download
when exporting the logbook via the built-in web server: the CSV send
loop never yielded the CPU, starving the idle task on larger logbooks.
The export loop now yields periodically (delay(1) every 10 lines and
after each file).
Removes the screenshot feature (camera button, on-device BMP storage,
web-based screenshot browser). Screenshots always came out solid
black - diagnosis showed the SPI readback from the display returns all
zeros regardless of SPI_READ_FREQUENCY, indicating TFT_MISO isn't
wired to the display on this CYD board revision. This is a hardware
limitation, not fixable in software, so the feature has been removed
rather than shipped broken.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Location presets can now optionally be given a name (e.g. "Home"),
shown in the overview instead of the raw coordinates. The
nearest-airport ticker on the Location Presets screen is now
tappable (shown with a thin green border) and adds that airport
directly as a new preset with its name and coordinates, using the
existing local airport database on the SD card - no internet lookup
needed. AirportLookup::findNearest() now also returns the found
airport's own lat/lon for this purpose.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New:
- Flight logbook safety net: disabled by default, requires confirming
a full-screen warning before it can be turned on, and automatically
switches off again after exactly 24 hours - survives restarts and
power cycles (no valid enable timestamp = guaranteed off). Each
activation now writes its own CSV file instead of endlessly
appending to one growing file, and every file can be deleted
individually from Logbook files.
- Adjustable display brightness (10-100% in 10% steps, Menu -> System
-> "Brightness") with a live preview.
- About screen (Menu -> System -> "About") showing project name,
description, and firmware version.
Fixed:
- Radar's red altitude band (>9100m/30000ft) no longer gets dimmed at
night - the previous dim tone looked orange-brown and was hard to
tell apart from yellow. Legend and markers are consistent again.
- Radius change no longer leaves a stale "tail" trail behind each
aircraft between the old and new position.
- Splash screen no longer shows a time-of-day greeting that appeared
too late in the boot sequence to be useful; the star animation now
starts immediately instead of only near the end of boot.
- Clock stayed on raw UTC after the first boot instead of local time
(missing DST handling in some timezones) because the location wait
loop skipped the timezone lookup once a location was already saved.
- Header clock no longer leaves stale digit fragments behind the
current time, most visible on the last minute digit.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New:
- Aircraft list (Menu -> Flight Options, top entry): sortable list
(distance/altitude/callsign) of every aircraft currently in range,
with the same altitude color-coding and emergency/watchlist border
highlighting as the radar. Tapping a row jumps back to the radar
with that aircraft's detail panel already open.
- Night dimming now also softens the radar screen itself (aircraft
markers and the sweep line switch to darker tones) during the
existing 22:00-06:00 window, reusing the same setting - no new
toggle.
Improved:
- Removed the unused built-in TFT_eSPI number fonts (GLCD/Font2/
Font4/Font6/Font7/Font8) from platformio.ini - the project only
ever uses the custom UI font via setFreeFont(). Saves ~15KB flash.
Also documents a CYD-flightradar.bin staleness safety check in the
CLAUDE.md release workflow (delete any leftover copy from a previous
release before renaming the fresh build, so an old binary can never
be silently re-used for a GitHub release).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three small usability additions:
- Splash screen now shows a "Good morning/day/evening" greeting under
the title, based on local time (computed after the timezone offset
from IP geolocation is applied via configTime(), not before, so it
reflects actual local time rather than UTC).
- Selecting an aircraft on the radar now also draws a dotted bearing
line plus a degree label from the radar center to the compass edge,
showing which direction to actually look to spot it in the sky
(distinct from the aircraft's own heading arrow).
- The radar info bar now shows "Empty sky for <time>" instead of the
"tap for details" hint whenever no aircraft are currently in range
after all filters, counting up from the last sighting.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds FlightLogbook::todayMaxAltitude(), which scans today's logbook
CSV for the entry with the greatest altitude at first sighting, and
displays it as "Highest flight today: <callsign> (<alt> ft)" on the
Statistics screen (Menu -> Flight Options -> Statistics).
Also documents the CYD-flightradar.bin rename step (for GitHub
release uploads) in the CLAUDE.md release workflow.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a 7-day bar-chart view of the flight logbook (Menu -> Flight
Options -> History chart), and a small built-in web server that
serves a logbook overview page plus a merged CSV export of all
logged days once the device is connected to WiFi (discoverable via
the "?" button on the Logbook files screen, which now also shows the
live device IP). Also fixes the "nearest airport" line on the
Location Presets screen, which previously used tft.setViewport() and
went completely invisible with our custom font - it now scrolls as a
proper marquee without relying on the viewport clip.
Also documents the standard release workflow in CLAUDE.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
