Adds a "Logbook / WebUI" entry directly in Menu > System, showing the
device's IP and usage instructions (previously only reachable via a
hidden "?" button in Logbook Files). The web export page now supports
downloading and deleting individual daily logbook CSV files, in
addition to the existing merged CSV download.
Fixes a task watchdog reset that could reboot the device mid-download
when exporting the logbook via the built-in web server: the CSV send
loop never yielded the CPU, starving the idle task on larger logbooks.
The export loop now yields periodically (delay(1) every 10 lines and
after each file).
Removes the screenshot feature (camera button, on-device BMP storage,
web-based screenshot browser). Screenshots always came out solid
black - diagnosis showed the SPI readback from the display returns all
zeros regardless of SPI_READ_FREQUENCY, indicating TFT_MISO isn't
wired to the display on this CYD board revision. This is a hardware
limitation, not fixable in software, so the feature has been removed
rather than shipped broken.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.4 and refreshes
firmware.bin to match the v2.7.4 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Location presets can now optionally be given a name (e.g. "Home"),
shown in the overview instead of the raw coordinates. The
nearest-airport ticker on the Location Presets screen is now
tappable (shown with a thin green border) and adds that airport
directly as a new preset with its name and coordinates, using the
existing local airport database on the SD card - no internet lookup
needed. AirportLookup::findNearest() now also returns the found
airport's own lat/lon for this purpose.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.3 and refreshes
firmware.bin to match the v2.7.3 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New:
- Flight logbook safety net: disabled by default, requires confirming
a full-screen warning before it can be turned on, and automatically
switches off again after exactly 24 hours - survives restarts and
power cycles (no valid enable timestamp = guaranteed off). Each
activation now writes its own CSV file instead of endlessly
appending to one growing file, and every file can be deleted
individually from Logbook files.
- Adjustable display brightness (10-100% in 10% steps, Menu -> System
-> "Brightness") with a live preview.
- About screen (Menu -> System -> "About") showing project name,
description, and firmware version.
Fixed:
- Radar's red altitude band (>9100m/30000ft) no longer gets dimmed at
night - the previous dim tone looked orange-brown and was hard to
tell apart from yellow. Legend and markers are consistent again.
- Radius change no longer leaves a stale "tail" trail behind each
aircraft between the old and new position.
- Splash screen no longer shows a time-of-day greeting that appeared
too late in the boot sequence to be useful; the star animation now
starts immediately instead of only near the end of boot.
- Clock stayed on raw UTC after the first boot instead of local time
(missing DST handling in some timezones) because the location wait
loop skipped the timezone lookup once a location was already saved.
- Header clock no longer leaves stale digit fragments behind the
current time, most visible on the last minute digit.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.2 and refreshes
firmware.bin to match the v2.7.2 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New:
- Aircraft list (Menu -> Flight Options, top entry): sortable list
(distance/altitude/callsign) of every aircraft currently in range,
with the same altitude color-coding and emergency/watchlist border
highlighting as the radar. Tapping a row jumps back to the radar
with that aircraft's detail panel already open.
- Night dimming now also softens the radar screen itself (aircraft
markers and the sweep line switch to darker tones) during the
existing 22:00-06:00 window, reusing the same setting - no new
toggle.
Improved:
- Removed the unused built-in TFT_eSPI number fonts (GLCD/Font2/
Font4/Font6/Font7/Font8) from platformio.ini - the project only
ever uses the custom UI font via setFreeFont(). Saves ~15KB flash.
Also documents a CYD-flightradar.bin staleness safety check in the
CLAUDE.md release workflow (delete any leftover copy from a previous
release before renaming the fresh build, so an old binary can never
be silently re-used for a GitHub release).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The em dash before the link made it sit awkwardly mid-sentence;
rephrased for a more natural read.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Step 2 said to click the "Install" button, but the esp-web-tools
default button (no custom activate slot defined) actually reads
"Connect", which was confusing for new users.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.1 and refreshes
firmware.bin to match the v2.7.1 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three small layout bugs found after v2.7.0:
- Watchlist info screen title now wraps word-by-word via
layoutWrapped() instead of println(), which cut it off mid-word.
- Watchlist overview screen draws the "?" info button first, so the
title and two description lines start below it instead of running
underneath and getting obscured.
- The radar's "empty sky for..." timer now shows only whole minutes
once past the first minute (e.g. "2min" instead of "2min 05s"),
since the seconds suffix collided with the range button.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.0 and refreshes
firmware.bin to match the v2.7.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three small usability additions:
- Splash screen now shows a "Good morning/day/evening" greeting under
the title, based on local time (computed after the timezone offset
from IP geolocation is applied via configTime(), not before, so it
reflects actual local time rather than UTC).
- Selecting an aircraft on the radar now also draws a dotted bearing
line plus a degree label from the radar center to the compass edge,
showing which direction to actually look to spot it in the sky
(distinct from the aircraft's own heading arrow).
- The radar info bar now shows "Empty sky for <time>" instead of the
"tap for details" hint whenever no aircraft are currently in range
after all filters, counting up from the last sighting.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.6.5 and refreshes
firmware.bin to match the v2.6.5 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
drawAircraftMarker() previously drew a plain symmetric line for an
aircraft's heading, making it impossible to tell at a glance which
end pointed "forward". The line now ends in a small two-stroke
arrowhead (chevron), so the direction of travel is unambiguous.
Also documents that the index.html version-badge check (release
workflow step 4) is mandatory and not optional, since it was
accidentally skipped on a recent patch release.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.6.1 and refreshes
firmware.bin to match the v2.6.1 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The v2.6.0 addition was drawn as a single line that could overflow
and collide with the "Reset logbook data" button. It now uses the
same two-line drawStatRow() layout (label + value) as the other
stats, with all row Y positions shifted up slightly to make room,
and the i18n strings dropped their now-redundant ": " suffix since
drawStatRow() renders label and value on separate lines.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.6.0 and refreshes
firmware.bin to match the v2.6.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds FlightLogbook::todayMaxAltitude(), which scans today's logbook
CSV for the entry with the greatest altitude at first sighting, and
displays it as "Highest flight today: <callsign> (<alt> ft)" on the
Statistics screen (Menu -> Flight Options -> Statistics).
Also documents the CYD-flightradar.bin rename step (for GitHub
release uploads) in the CLAUDE.md release workflow.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.5.1 and refreshes
firmware.bin to match the v2.5.1 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Several fixes to the "nearest airport" marquee on the Location
Presets screen, building on the size-2 enlargement from the previous
commit:
- Fix leftover dashed line above the text by clearing a background
area sized for size-2 text and by running MenuStars::update()
before drawMarquee() in the wait loop (stars could otherwise be
drawn over the freshly rendered text).
- A pixel-perfect scrolling attempt (sub-character cursor offset)
caused a stray green box to the left of the text and has been
reverted in favor of the original whole-character scrolling, with
a shorter gap (3 spaces) and a more generous clear rect.
- Slowed the scroll step from 120ms to 200ms per character for a
calmer, more readable pace.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The scrolling "nearest airport" line on the Location Presets screen
was hard to read at size 1. setupMarquee() now measures text width
at size 2 (matching what drawMarquee() actually renders), and
drawMarquee() resets back to size 1 on both return paths so it
doesn't leak into subsequently drawn UI (e.g. the Back button).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.5.0 and refreshes
firmware.bin to match the v2.5.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a 7-day bar-chart view of the flight logbook (Menu -> Flight
Options -> History chart), and a small built-in web server that
serves a logbook overview page plus a merged CSV export of all
logged days once the device is connected to WiFi (discoverable via
the "?" button on the Logbook files screen, which now also shows the
live device IP). Also fixes the "nearest airport" line on the
Location Presets screen, which previously used tft.setViewport() and
went completely invisible with our custom font - it now scrolls as a
proper marquee without relying on the viewport clip.
Also documents the standard release workflow in CLAUDE.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Changes the h1 from "FLIGHTRADAR CYD" to "EISWOLFS FLIGHTRADAR CYD"
to match the repo/README naming, and reduces the font size slightly
so the longer title still fits on one line.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.4.0 and refreshes
firmware.bin to match the current build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
