Removes the experimental Sound/beep feature after hardware testing
revealed unfixable electrical interference noise synced to the
radar-sweep SPI traffic. Adds progress-dot feedback on the Settings
Backup/Restore buttons so they no longer look frozen during the SD
copy. Chains three independent free flight-route lookup sources
instead of relying on adsbdb.com alone, which had poor real-world
coverage (~80% "unknown").
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v3.3.0 and refreshes
firmware.bin and partitions.bin to match the v3.3.0 build output -
partitions.bin changed because this release switches to the no_ota.csv
partition scheme.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v3.2.0 and refreshes
firmware.bin to match the v3.2.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The yellow (mid-altitude) legend entry was pinned to a fixed 1/3-grid
column like the outer green/red entries, but its label ("3000-9100")
is noticeably longer than the others, making it sit visually too far
right - almost touching the red entry while leaving a lot of empty
space next to the short green label. Green and red keep their fixed
positions; yellow is now centered in the actual gap between them,
computed from gfx.textWidth() so it works correctly in both unit
modes (Metric and Imperial).
Refreshes firmware.bin to match this build.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The header clock now shows 12-hour time with AM/PM when Imperial
units are selected (Menu > Units), instead of always using 24-hour
format - the clock-clear region was widened from 50px to 80px to fully
erase the longer "12:59PM"-style text.
The aircraft detail panel's distance line now also shows miles
alongside km and nautical miles (e.g. "12km / 6nm / 7mi"), since nm
alone wasn't self-explanatory for lay users from Imperial-unit
countries.
Also fixes the radar screen's range button, which still always showed
a fixed "km" label regardless of the Metric/Imperial setting - it now
shows mi (converted) when Imperial is selected, matching the pattern
already used by the altitude legend.
Refreshes firmware.bin to match this build.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a note to the "Hide ground vehicles" section about the new blue
square markers and matching legend entry, and refreshes the root
firmware.bin to match the v3.1.0 build output including the ground
vehicle marker feature.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v3.1.0 and refreshes
firmware.bin to match the v3.1.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v3.0.1 and refreshes
firmware.bin to match the v3.0.1 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v3.0.0 and refreshes
firmware.bin to match the v3.0.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.8.5 and refreshes
firmware.bin to match the v2.8.5 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.8.0 and refreshes
firmware.bin to match the v2.8.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.5 and refreshes
firmware.bin to match the v2.7.5 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.4 and refreshes
firmware.bin to match the v2.7.4 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.3 and refreshes
firmware.bin to match the v2.7.3 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.2 and refreshes
firmware.bin to match the v2.7.2 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.1 and refreshes
firmware.bin to match the v2.7.1 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.7.0 and refreshes
firmware.bin to match the v2.7.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.6.5 and refreshes
firmware.bin to match the v2.6.5 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.6.1 and refreshes
firmware.bin to match the v2.6.1 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.6.0 and refreshes
firmware.bin to match the v2.6.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.5.1 and refreshes
firmware.bin to match the v2.5.1 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.5.0 and refreshes
firmware.bin to match the v2.5.0 build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bumps the web flasher version display to v2.4.0 and refreshes
firmware.bin to match the current build output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
