a7f14b3125
## New - "Welcome" screen shown on first-time setup (before touch calibration), with the splash screen's animated radar graphic and a Start button. - The "Setup complete" screen now counts down 7 seconds with a button matching the Welcome screen's style, then automatically continues into the app (previously required a tap). - System menu "Backup & Reset" page (Backup, Restore, and a new "Reset settings" option that wipes the on-device data and re-runs first-time setup - useful for testing or handing the device to someone else). - Touch calibration targets are now green mini radar reticles instead of red crosshairs. ## Improved - The SD card's data folder is now only created after tapping Start on the Welcome screen, instead of on every boot regardless. - Flash partition layout changed to free up roughly 850 KB of firmware space (no OTA update slot needed, since firmware is always flashed via cable/USB) - lowers flash usage from ~95% to ~59%. ## Fixed - The Start button and the WiFi scanning screen now show a loading indicator instead of appearing frozen during SD-card/WiFi operations. - A touch-input bug during first-time setup that could corrupt touch calibration and cause taps to land on the wrong on-screen element afterward (most noticeable in the WiFi network selection list). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
39 lines
1.1 KiB
INI
39 lines
1.1 KiB
INI
[env:esp32dev]
|
|
platform = espressif32
|
|
board = esp32dev
|
|
framework = arduino
|
|
monitor_speed = 115200
|
|
upload_speed = 921600
|
|
|
|
; No OTA (over-the-air firmware update) in use - always flashed via
|
|
; cable/web-flasher. The default partition scheme reserves two app
|
|
; partitions (~1.25 MB each) plus an unused SPIFFS data area (~1.375 MB) -
|
|
; over 2.5 MB of 4 MB flash wasted. "no_ota.csv" (shipped with the
|
|
; Espressif framework) uses a single, 2 MB app partition instead - doubles
|
|
; the space available for the actual firmware, no code changes needed.
|
|
board_build.partitions = no_ota.csv
|
|
|
|
lib_deps =
|
|
bodmer/TFT_eSPI @ ^2.5.43
|
|
https://github.com/PaulStoffregen/XPT2046_Touchscreen.git
|
|
bblanchon/ArduinoJson @ ^7.0.4
|
|
mikalhart/TinyGPSPlus @ ^1.1.0
|
|
|
|
build_flags =
|
|
-D USER_SETUP_LOADED=1
|
|
-D ILI9341_2_DRIVER=1
|
|
-D TFT_WIDTH=240
|
|
-D TFT_HEIGHT=320
|
|
-D TFT_MISO=12
|
|
-D TFT_MOSI=13
|
|
-D TFT_SCLK=14
|
|
-D TFT_CS=15
|
|
-D TFT_DC=2
|
|
-D TFT_RST=-1
|
|
-D TFT_BL=21
|
|
-D TFT_BACKLIGHT_ON=HIGH
|
|
-D SPI_FREQUENCY=55000000
|
|
-D SPI_READ_FREQUENCY=1000000
|
|
-D SPI_TOUCH_FREQUENCY=2500000
|
|
-D LOAD_GFXFF=1
|
|
-D SMOOTH_FONT=1 |