32f8e873a9
Detail panel now shows origin/destination via adsbdb.com callsign lookup. Rotorcraft (ADS-B category A7) get a distinct rotor-cross marker instead of a heading arrowhead, same rationale as the existing ground-vehicle marker. WebUI info screen gets a QR button (when WiFi is connected) that renders the local WebUI URL as a scannable code. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
40 lines
1.2 KiB
INI
40 lines
1.2 KiB
INI
[env:esp32dev]
|
|
platform = espressif32
|
|
board = esp32dev
|
|
framework = arduino
|
|
monitor_speed = 115200
|
|
upload_speed = 921600
|
|
|
|
; No OTA (over-the-air firmware update) in use - always flashed via
|
|
; cable/web-flasher. The default partition scheme reserves two app
|
|
; partitions (~1.25 MB each) plus an unused SPIFFS data area (~1.375 MB) -
|
|
; over 2.5 MB of 4 MB flash wasted. "no_ota.csv" (shipped with the
|
|
; Espressif framework) uses a single, 2 MB app partition instead - doubles
|
|
; the space available for the actual firmware, no code changes needed.
|
|
board_build.partitions = no_ota.csv
|
|
|
|
lib_deps =
|
|
bodmer/TFT_eSPI @ ^2.5.43
|
|
https://github.com/PaulStoffregen/XPT2046_Touchscreen.git
|
|
bblanchon/ArduinoJson @ ^7.0.4
|
|
mikalhart/TinyGPSPlus @ ^1.1.0
|
|
ricmoo/QRCode @ ^0.0.1
|
|
|
|
build_flags =
|
|
-D USER_SETUP_LOADED=1
|
|
-D ILI9341_2_DRIVER=1
|
|
-D TFT_WIDTH=240
|
|
-D TFT_HEIGHT=320
|
|
-D TFT_MISO=12
|
|
-D TFT_MOSI=13
|
|
-D TFT_SCLK=14
|
|
-D TFT_CS=15
|
|
-D TFT_DC=2
|
|
-D TFT_RST=-1
|
|
-D TFT_BL=21
|
|
-D TFT_BACKLIGHT_ON=HIGH
|
|
-D SPI_FREQUENCY=55000000
|
|
-D SPI_READ_FREQUENCY=1000000
|
|
-D SPI_TOUCH_FREQUENCY=2500000
|
|
-D LOAD_GFXFF=1
|
|
-D SMOOTH_FONT=1 |