|
|
6b8e8f3e8d
|
fix(ota): bypass 64KB flash block erase, increase WDT timeouts, and place encoder table in DRAM
ESP32 Build & Release / build (push) Successful in 1m11s
|
2026-09-12 15:52:12 +02:00 |
|
|
|
3708674bbb
|
AP menu
ESP32 Build & Release / build (push) Successful in 6m40s
|
2026-09-12 13:47:34 +02:00 |
|
|
|
8ac465229c
|
clean up
|
2026-09-12 03:40:10 +02:00 |
|
|
|
029ceee69a
|
various bug fixes
|
2026-09-11 19:10:31 +02:00 |
|
|
|
e8b6ee2dcc
|
display: fix font bit-order (MSB=left) and remove panel mirror; rfid: probe uses HALFDUPLEX so VersionReg read is valid
|
2026-09-10 19:11:58 +02:00 |
|
|
|
d2a10df6c6
|
rfid: add boot-time MFRC522 VersionReg probe over SPI3 to definitively diagnose MISO/power vs reset-path
|
2026-09-10 18:59:25 +02:00 |
|
|
|
993962865b
|
rfid: harden SPI3 bus init failure path (no abort), add reader-bus diagnostic log
|
2026-09-10 17:15:23 +02:00 |
|
|
|
3072795a4b
|
rfid: use <=15-char task name for xTaskGetHandle to avoid FreeRTOS assert; library task renamed to rc522_poll locally
|
2026-09-10 16:59:30 +02:00 |
|
|
|
347728de6d
|
rfid: allow RST-unconnected mode (no hard reset) and add optional self-test skip for clone readers
|
2026-09-10 16:28:41 +02:00 |
|
|
|
12690657cc
|
Move MFRC522 to dedicated SPI3_HOST bus (SCK16/MOSI17/MISO13/CS26) separate from display SPI2
|
2026-09-10 07:13:15 +02:00 |
|
|
|
05d8012c8b
|
Fix SoftAP boot abort: stop DHCP before setting static AP IP; drop RC522 SPI clock to 1 MHz; order RFID before display init
|
2026-09-10 07:01:57 +02:00 |
|
|
|
3f230283da
|
rfid: lower MFRC522 SPI clock to 2 MHz for clone-reader self-test stability
|
2026-09-10 06:11:44 +02:00 |
|
|
|
96d14c0538
|
Make RFID failure non-fatal (self-test retries, 4MHz clock, diagnostic log), add beginner Wi-Fi guide + RFID troubleshooting to README
|
2026-09-09 21:52:40 +02:00 |
|
|
|
ec1e7a0d5a
|
Phase 3: MFRC522 RFID subsystem on Core 0 with UID hex conversion, enable FreeRTOS SMP
|
2026-09-09 16:55:04 +02:00 |
|
