62 lines
3.0 KiB
Markdown
62 lines
3.0 KiB
Markdown
# Eiswolfs Flightradar (CYD)
|
||
|
||
A live ADS-B flight radar running on the ESP32 "Cheap Yellow Display" (CYD,
|
||
ESP32-2432S028), showing nearby aircraft on a rotating radar screen with
|
||
altitude/speed/model/route details and a proximity LED alert.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
## Features
|
||
|
||
- **Live radar screen** – circular radar view, sized to the full screen width, with a rotating green sweep line
|
||
- **Real ADS-B data** via the free [adsb.fi](https://adsb.fi) API, refreshed every 8 seconds
|
||
- **Color-coded aircraft** by altitude (green `<10k ft`, yellow `10-30k ft`, red `>30k ft`) with an on-screen legend
|
||
- **Tap an aircraft** to open a detail panel: callsign, airline, aircraft model (via [hexdb.io](https://hexdb.io)), altitude/speed/distance/heading in both metric and aviation units, estimated seat count
|
||
- **Adjustable range** (10/25/50/100 km) via on-screen button
|
||
- **Touch-driven WiFi setup** and on-screen keyboard for first-time configuration
|
||
- **IP-based geolocation** (no GPS module needed) to center the radar on your location
|
||
- **Proximity LED alert** – the onboard RGB LED blinks green when an aircraft is within 3 km (no speaker on this board, so this replaces an audible alert)
|
||
- **Dual-core design** – all networking (WiFi, ADS-B polling, aircraft detail lookups) runs on Core 0, while the display and touch input run on Core 1, so the UI never freezes during a network request
|
||
- Data (airline names, aircraft-type seat estimates) loaded from CSV files on the SD card, auto-seeded on first boot
|
||
|
||
## Hardware
|
||
|
||
- ESP32-2432S028 ("Cheap Yellow Display", CYD) – ILI9341 2.8" 240x320 touch TFT
|
||
- microSD card (FAT32) for settings, WiFi credentials, and lookup tables
|
||
- No GPS, no speaker required – uses IP geolocation and the onboard RGB LED
|
||
|
||
### Pinout used
|
||
|
||
| Function | Pins |
|
||
|---|---|
|
||
| TFT (VSPI) | MISO=12, MOSI=13, SCLK=14, CS=15, DC=2, BL=21 |
|
||
| Touch (XPT2046) | CLK=25, CS=33, MOSI=32, MISO=39, IRQ=36 |
|
||
| microSD (HSPI) | CLK=18, MISO=19, MOSI=23, CS=5 |
|
||
| RGB LED (active-low) | R=4, G=16, B=17 |
|
||
|
||
## Getting started
|
||
|
||
1. Flash with PlatformIO (`platform = espressif32`, `board = esp32dev`, `framework = arduino`)
|
||
2. Insert a FAT32-formatted microSD card
|
||
3. On first boot: touch-calibrate the screen, then select your WiFi network and enter the password using the on-screen keyboard
|
||
4. The radar screen appears automatically once WiFi and location are ready
|
||
|
||
## Data sources
|
||
|
||
- Aircraft positions: [adsb.fi](https://adsb.fi) (free, no API key)
|
||
- Aircraft model lookups: [hexdb.io](https://hexdb.io) (free, community-maintained, rate-limited)
|
||
- Location: [ip-api.com](https://ip-api.com) (free IP geolocation)
|
||
|
||
## Disclaimer
|
||
|
||
Aircraft model and seat-count data are estimates from community databases and
|
||
local lookup tables, not live/official figures. This project is for hobby use
|
||
and is not intended for navigation or safety-critical purposes.
|
||
|
||
## License
|
||
|
||
MIT (or add your preferred license here)
|